Front brake pads: 2013–2018 Ram 1500
Mopar's catalog lists one front pad kit for every 2013–2018 Ram 1500 engine (3.6L V6, 4.7L, 5.7L HEMI, 3.0L EcoDiesel) and trim: 68334862AB. It replaces the 5143350AC fitted to earlier trucks.
Part numbers
Front pad kit
1 kit (both front wheels)
Mopar 68334862AB
Genuine Mopar front disc brake pad kit
Replaces 5143350AC and 68334862AA.
Front pad kit (Mopar Value Line)
1 kit
Mopar 1BP00284AA
Mopar's lower-cost line; replaces V1013350AC and V1013550AA.
Some store links earn NoJunkParts a small commission, at no extra cost to you. It never changes which part we recommend or the order the stores appear in. How we make money
How the job goes
- Loosen the lug nuts, raise the truck, support it on jack stands, and remove the wheels.
- Remove the caliper bolts and lift the caliper off. Hang it with wire; don't let it hang by the hose.
- Remove the old pads and clips. Clean the bracket where the clips sit.
- Install the new clips (from the kit) and pads, with any wear indicator in the same position as the old one.
- Push the caliper piston back slowly, watching that the brake fluid reservoir doesn't overflow.
- Reinstall the caliper and wheels, pump the pedal until it's firm before you drive, then bed in the new pads.
Before you order
- Confirm caliper and lug nut torque in a service manual for your truck.
- Check rotor thickness and condition; worn or scored rotors should be replaced or resurfaced with new pads.
- Fits the 2013–2018 Ram 1500 (DS). The 2019+ redesigned Ram 1500 uses different brakes; 2019+ "Classic" models aren't covered here yet.