Oil filter: 2012–2016 CR-V
Honda's catalog lists oil filter 15400-PLM-A02 for every 2012–2016 CR-V (2WD and AWD). It replaced the older 15400-RTA-003.
Part numbers
Oil filter
1
Honda 15400-PLM-A02
Genuine Honda spin-on oil filter
Replaces 15400-RTA-003 and many older Honda numbers.
Some store links earn NoJunkParts a small commission, at no extra cost to you. It never changes which part we recommend or the order the stores appear in. How we make money
How the job goes
- Warm the engine briefly, park on level ground, and shut it off.
- Remove the drain plug and let the oil drain fully.
- Remove the old filter and make sure its rubber gasket came off with it.
- Oil the new filter's gasket and spin it on hand-tight plus about 3/4 turn.
- Reinstall the drain plug with a new crush washer, refill with the grade and amount in your owner's manual, and check for leaks.
Before you order
- Oil grade and capacity vary by engine. Check your owner's manual or oil filler cap.
- A double gasket (old one stuck to the engine) will leak badly. Always check.