Oil filter: 2013–2019 Outback 2.5L
The 2013–2019 Outback 2.5i uses Subaru oil filter 15208AA21A (it replaced the 15208AA15A listed for these years).
Part numbers
Oil filter
1
Subaru 15208AA21A
Genuine Subaru spin-on oil filter (current number)
Subaru's catalog shows 15208AA15A and 15208AA160 as replaced by this number.
Some store links earn NoJunkParts a small commission, at no extra cost to you. It never changes which part we recommend or the order the stores appear in. How we make money
How the job goes
- Warm the engine briefly, park on level ground, and shut it off.
- Drain the oil, then remove the old filter. Make sure its gasket came off with it.
- Oil the new filter's gasket and spin it on hand-tight plus about 3/4 turn.
- Reinstall the drain plug with a new washer, refill with the grade and amount in your owner's manual, and check for leaks.
Before you order
- Check your owner's manual for the approved oil specification and capacity.
- The 3.6R (6-cylinder) uses a different filter, 15208AA031.