2014–2020 Jeep Grand Cherokee Oil Filter (3.6L)

Part numbers

• Oil filter

  1

  Mopar 68191349AC

  Copy

  Genuine Mopar oil filter

  Replaces 68191349AA and 68191349AB.

  Buy it:RockAutoAmazoneBay

Some store links earn NoJunkParts a small commission, at no extra cost to you. It never changes which part we recommend or the order the stores appear in. How we make money

How the job goes

1. Warm the engine briefly, park on level ground, and shut it off.
2. Drain the oil.
3. Remove the old filter (or, on cartridge housings, unscrew the cap and pull the old element). Make sure the old gasket or O-ring came out.
4. Install the new filter or element with its new O-ring/gasket lightly oiled; tighten spin-ons hand-tight plus about 3/4 turn, or the cartridge cap to the torque on the cap.
5. Reinstall the drain plug, refill with the grade and amount in your owner's manual, run the engine, and check for leaks.

Before you order

• Check your owner's manual for oil grade and capacity; they differ by engine.
• 2011–2013 3.6L engines use a different filter (68079744AD).

Sources

• Mopar Parts Giant: 2014 Jeep Grand Cherokee oil filter (Mopar catalog)
• Mopar Parts Giant: 2016 Jeep Grand Cherokee oil filter (Mopar catalog)
• Mopar Parts Giant: 2020 Jeep Grand Cherokee oil filter (Mopar catalog)