Oil filter: 2013–2018 Fusion 1.5L/2.0L EcoBoost and 2.0L Hybrid
For the 2013–2018 Fusion with the 1.5L or 2.0L EcoBoost, or the 2.0L Hybrid/Energi, Ford's catalog lists BE8Z-6731-AB, sold at retail as Motorcraft FL-910S.
Part numbers
Oil filter
1
Motorcraft FL-910S
Motorcraft spin-on oil filter (Ford part BE8Z-6731-AB)
Oil filter (Ford service number)
1
Ford BE8Z-6731-AB
The number Ford's parts catalog uses for the same filter.
Some store links earn NoJunkParts a small commission, at no extra cost to you. It never changes which part we recommend or the order the stores appear in. How we make money
How the job goes
- Warm the engine briefly, park on level ground, and shut it off.
- Drain the oil, then remove the old filter. Make sure its gasket came off with it.
- Oil the new filter's gasket and spin it on hand-tight plus about 3/4 turn.
- Reinstall the drain plug, refill with the grade and amount on your oil filler cap or in the owner's manual, and check for leaks.
Before you order
- Not for 2.5L engines: Ford's catalog lists two different filters for them, so GearGuide doesn't pick one yet.
- Not for the 2.7L V6 (Fusion Sport), which uses a different filter.
- Check your owner's manual for oil grade and capacity.